Installation Instructions
TOOLS YOU WILL NEED
# 1 and #2 Phillips screwdriver | Pencil |
|
Ruler or tape measure and straight edge
Carpenter square (optional)
Tin snips (for cutting damper, if required)
Gloves
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Electric drill with 3⁄16″, 1⁄2″ and 5⁄8″ drill bits
Stud finder or Hammer (optional)
Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only)
Safety goggles | Duct and masking tape |
Level |
MOUNTING SPACE
|
| Bottom Edge of |
|
| Cabinet Needs to |
|
| be 30″ or More |
161⁄2″ |
| from the Cooking |
| Surface | |
| 30″ | 30″ |
| min. | |
|
| |
| 2″ | Backsplash |
|
|
66″ or More from the Floor to the Top of the Microwave
NOTES:
•The space between the cabinets must be 30″ wide and free of obstructions.
•If the space between the cabinets is greater than 30″, a Filler Panel Kit may be used to fill in the gap between the microwave oven and the cabinets. Your Owner’s Manual contains the kit number for your model.
•This microwave oven is for installation over ranges up to 36″ wide.
•If you are going to vent your microwave oven to the outside, see Hood Exhaust Section for exhaust duct preparation.
•When installing the microwave oven beneath smooth, flat cabinets, be careful to follow the instructions on the top cabinet template for power cord clearance.
7
