GE JBP70, EER2000 owner manual Painted Surfaces, Oven Vent, Oven Shelves, Operating Instructions

Models: JBP70 EER2000

1 32
Download 32 pages 28.52 Kb
Page 21
Image 21

 

www.GEAppliances.com

Painted Surfaces

 

Painted surfaces include the sides, top of

Do not use commercial oven cleaners,

backguard and the drawer front.

cleaning powders, steel wool or harsh

Clean these with soap and water or a

abrasives on any painted surface.

 

vinegar and water solution.

 

Safety Instructions

Oven Vent

The oven vent is located behind the right rear surface unit.

This area could become hot during oven use.

It is normal for steam to come out of the vent and moisture may collect underneath it when the oven is in use.

The vent is important for proper air circulation. Never block this vent.

Operating Instructions

Oven Shelves

Clean the oven shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water and dry with a clean cloth.

NOTE: The oven shelves may be cleaned in the self-cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle.

To make the shelves slide more easily apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Care and Cleaning Troubleshooting Tips Consumer Support

21

Page 21
Image 21
GE JBP70, EER2000 Painted Surfaces, Oven Vent, Oven Shelves, Oven vent is located behind the right rear surface unit