Normal operating characteristics

Operating Instructions Safety Instructions

Installation

Instructions

Consumer Support Troubleshooting Tips

Normal operating characteristics.

These things are normal and

do not indicate a need for service.

■A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through the exterior cabinet walls.

■The sound of the high-efficiency compressor motor.

■On No-Frost models, the sound of water dripping as it melts from the evaporator and escapes to the drain pan during defrost cycle.

■On No-Frost models, the sound of the fan circulating air within the interior of the cabinet providing a consistent temperature throughout.

Before you call for service…

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem	Possible Causes	What To Do

Freezer does not	Temperature control	• Move the control to a temperature setting.
operate or Power-On	in OFF position.
Light is not on
Light is not on	Freezer is unplugged.	• Push the plug completely into the outlet.
	Freezer is unplugged.	• Push the plug completely into the outlet.

	The fuse is blown/circuit	•Replace fuse or reset the breaker.
	breaker is tripped.

Freezer starts/stops	Door/lid left open.	• Check to see if package is holding door/lid open.
too frequently
too frequently	Too frequent or too long
	Too frequent or too long
	door/lid openings.

	Temperature control	•See About the operation of your freezer.
	set too cold.

Freezer operates	Door/lid left open.	• Check to see if package is holding door/lid open.
too long
too long	Too frequent or too long
	Too frequent or too long
	door/lid openings.

	Temperature control	• See About the operation of your freezer.
	set too cold.

	Inadequate air circulation	•See Preparing to install the freezer.
	space around cabinet.

	Room or outside weather is hot.	•It’s normal for the freezer to work harder under these
		conditions.

	Freezer has been disconnected	•It takes 4 hours for the freezer to cool down completely.
	recently for a period of time.

	Large amounts of warm or hot	•Warm food will cause the freezer to run more until the
	food have been stored recently.	desired temperature is reached.

FUM13 specifications

The GE FUM13 is a highly advanced and versatile gas turbine that harnesses the latest technologies to deliver exceptional performance and efficiency. Designed for both flexibility and reliability, the FUM13 is a part of GE’s renowned portfolio, catering to a variety of industries including power generation, oil and gas, and industrial processes.

One of the standout features of the GE FUM13 is its ability to operate effectively across different fuel types. The turbine is designed for multi-fuel operation, enabling users to switch between natural gas, oil, and other alternative fuels with ease. This adaptability not only helps in reducing operational costs but also enhances sustainability by allowing facilities to utilize the most economical or available fuel sources.

The FUM13 integrates state-of-the-art aerodynamics and thermodynamics principles, which contribute to its high efficiency ratings. Advanced cooling techniques are employed in the turbine’s design, ensuring that it can withstand high temperatures while maintaining performance. This capability aids in achieving significant efficiency gains, allowing for lower emissions and reduced fuel consumption, which are critical in today’s environmentally conscious landscape.

Furthermore, the GE FUM13 is equipped with digital technologies that leverage data analytics and predictive maintenance. The turbine harnesses real-time operational data, enabling operators to optimize performance and proactively address maintenance needs. This feature not only minimizes downtime but also extends the operational life of the turbine, ultimately resulting in cost savings over time.

A distinguishing characteristic of the FUM13 is its compact and modular design. This configuration facilitates easier installation and maintenance, allowing users to integrate the turbine into their existing infrastructure with minimal disruption. The modular approach also means that the system can be scaled to meet specific power output requirements, making it a suitable choice for both small and large-scale applications.

In summary, the GE FUM13 gas turbine stands out with its multi-fuel capability, advanced thermal efficiency, digital integration, and modular design. These features, combined with GE's commitment to innovation and sustainability, make the FUM13 an ideal solution for businesses looking to enhance their energy production systems while also addressing the challenges of fuel flexibility and emissions reduction. As industries continue to evolve, the GE FUM13 is poised to play a pivotal role in shaping the future of energy generation.

GE FUM13 owner manual Normal operating characteristics, Before you call for service…

Models: FUM13