Mounting Directions
1.Cabinet with overhang:
Fold the template along the dashed line. Line up the edge of the template to the edge of the cabinet on the underside, then tape in place.
Cabinet without overhang: Fold template along the outside edge of the bold line. Line up the edge of template to the edge of the cabinet on the underside, then tape in place.
2.Mark the center of the four holes through the template using a sharp point (nail or awl).
3.Remove template and drill four 3/16" holes where marked.
CAUTION: Always use safety glasses when drilling to avoid eye injury.
✁
(cut here)
MOUNTING TEMPLATE
Align edge of paper with side of cabinet or wall.
2.559 inches
Mark the CENTER of the hole
Front edge of cabinet (w
Align edge of paper with front edge of cabinet (without
4
