REFERENCE
47
Home View
These parts are inside of or attached to your house.
DSS® Satellite Dish Picks up the satellite’s coded program
information and relays it to your DSS® receiver. (Your satellite dish
may be installed in different locations on or around your house. The
satellite dish must, however, be pointed in a southern direction
toward the satellite.)
DSS® Receiver Receives the TV program information and sends it to
your TV or VCR.
Telephone Jack Connects to the phone jack on the back of the DSS®
receiver. The DSS® receiver uses a toll-free number once a month to
update your access card. This update only takes a few seconds and
ensures that you will have continuous service. The system
automatically hangs up if you pick up the phone when the DSS®
receiver is calling out.
Television If your television is remote controllable, you can program
the DSS® Universal TV Remote to change channels and volume.
DSS® TV Universal Remote (included with your DSS® system)
Controls the DSS® system as well as most remote controllable TVs,
VCRs, and other devices. Point the remote at the device you want to
control.
Access Card (installed in DSS® receiver) Must be inserted for you to
use the DSS® system! Provides system security and authorization of
DSS® services. Do not remove the card except when issued a new
card as a replacement for the original.
Satellite Dish DSS Receiver Telephone Jack
Remote Control
Access Card 
and Security Clip