HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher’s front panels to match or blend with your new colors, by flipping them over. Each side of each panel is a different color. You may also paint a panel with a color of your own choice.
How to Change the Door Panel:
1.Take out trim screws on either side of the dishwasher door. Remove the side trim.
2.Slide the door panel out.
3.Turn the door panel around and put the color you want in front.
4.Replace the door panel, side trim and screws.
NOTE: Do not operate dishwasher while changing panels or when lower access panel is removed.
How to Change the Lower Panel:
1. Remove the panel attachment screws.
2. Remove the entire access assembly by lifting it up and over the retaining tabs.
3. Take out the top trim screws and remove the top trim.
4. Slide the color panel(s) up and out and put the color you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by hanging it back on the retaining tabs. Hold the access
“L- assembly in place and replace attachment screws.
Attachment Screws
Wood panel fiim Kits (Available for both models)
Wood panel trim kits, contain trim and instructions for adding a decorative wood door panel and lower access panel no thicker than 1/4” to match kitchen cabinets.
Specify the trim color of your choice from the following options:
GPF40BC (Chrome Trim and Screws)
GPF40BK (Black Trim)
GPF40WH (White Trim)
The kit is available for $5.00 (shipping and handling). Make check payable to the General Electric Co.
12
Color panels (For model GSD650 only)
If you have redecorated, and the color panels in your dishwasher do not blend with your new color scheme you may order one additional color panel without charge.
Specify the color panel you would like from the following options:
GPF24 White/Almond
GPF26 HarvesdBlack
Order a Trim Kit or a Color Panel from: GE Appliances
CIO
4706 Allmond Ave.
Louisville, KY 40209
