You can configure a VNC (Virtual Network Computing) endpoint on the MCU by choosing 
. This makes it easier to add a VNC session to conferences because you can choose its name from a list rather than type its network address.
You can add VNC endpoints to the MCU. This enables you to have software applications running on a remote computer added to a conference. For example, if a speaker has a set of slides to present during a conference, you can
add them as a VNC endpoint. After entering the settings, click | . |
|
|
|
|
|
|
The name of the computer used for the VNC application (VNC endpoint).
The IP address or host name of the computer used for the VNC application (VNC endpoint).
The port used for communication to the VNC endpoint.
The VNC server password for the computer you're trying to view.
When a participant disconnects from a | Set to enabled if you want this endpoint to be |
conference and only endpoints set to Automatic | automatically disconnected from conferences |
disconnection are left, all those participants are | when only endpoints set to Automatic disconnection |
disconnected. | remain in a conference when any other |
| participant has disconnected. |
94
