TANDBERG MCU 4500, MSE 8510 manual enable the Automatically make content channel

	(see above).
	In these cases, if this option is set to Enabled, the
	MCU will display the content channel video
	within a pane of the currently selected conference
	layout. In these cases, you might also want to
	enable the Automatically make content channel
	important option in the
	page which will make the content channel
	important at the same time.
If this option is Enabled, the MCU will ignore fast	When this mode is active, it can prevent a large
update requests for a conference's content video	number of keyframes being sent in the shared
channel received from endpoints whose	content video encoding in response to fast update
connections are experiencing problems.	requests from a single endpoint. A high number
	of keyframes may reduce the video quality of the
	content channel for all conference participants,
	including those with good connections to the
	MCU.
Sets the bandwidth of the content channel video	Just as there is a single content video stream sent
stream sent to streaming viewers.	to all content-capable videoconferencing
	endpoints in a conference, there is a single
	content channel video stream sent to all
	streaming viewers.
This option is only available if the MCU web
conferencing (WCO) feature key is present.	This option allows the bandwidth of the streamed
	content channel video to be set. While in general
	a higher value means a greater frame rate (and
	thus better video quality), it is important to not
	set this value too high (i.e. higher than the
	available TCP network bandwidth between the
	MCU and viewers' machines) to avoid
	degradation resulting from lost data.
If Enabled, people viewing the content channel	Changing this setting has an immediate effect:
stream via a web browser will be able to add
markup to that video stream such as graphics and	if changed to Disabled, it will not be
text. This markup will then be visible to all	possible for existing viewers to complete
content channel viewers, both those viewing via	markup currently in progress
streaming and those connected via	if changed to Enabled, existing streaming
videoconferencing endpoints.
	viewers will gain the ability to add
	markup
This option is only available if the MCU web
conferencing (WCO) feature key is present.

133