TANDBERG MCU 4500, MSE 8510 manual Content contribution from endpoints setting from

Choose whether to use the unit-wide setting for motion/sharpness trade off, or configure an individual setting for use with this endpoint. Choose from:

<use box-wide setting>: this is the default value. In this case, the connection to the endpoint will use the motion / sharpness tradeoff setting from the

page.

Favor motion: the MCU will try and use a high frame rate. That is, the MCU will strongly favor a resolution of at least 25 frames per second

Favor sharpness: the MCU will use the highest resolution that is appropriate for what is being viewed

Balanced: the MCU will select settings that balance resolution and frame rate (where the frame rate will not be less than 12 frames per second)

The settings for motion (frames per second) and sharpness (frame size or resolution) are negotiated between the endpoint and the MCU. This setting controls how the MCU will negotiate the settings to be used with this endpoint.

Choose the setting for transmitted video	Retain the default setting (use box-wide setting)
resolutions from the MCU to this endpoint. This	unless you are experiencing problems with the
setting overrides the unit-wide setting on the	display of certain resolutions by this endpoint.
page
	Endpoints advertise the resolutions that they are
	able to display. The MCU then chooses from
	those advertised resolutions, the resolution that it
	will use to transmit video. However, some
	endpoints do not display widescreen resolutions
	optimally. Therefore, you might want to use this
	setting to restrict the resolutions available to the
	MCU for transmissions to this endpoint.
Whether this endpoint is permitted to contribute	This setting is provided to allow you to
the conference content channel. Choose from:	individually configure whether or not an
<use conference default>: this endpoint will use the	endpoint is allowed to contribute content to a
Content contribution from endpoints setting from the	conference.
per-conference configuration.	To use the content channel, the Content status
Enabled: This endpoint is allowed to contribute	must be enabled at the unit-wide level (on the
		page) and for any given
the content channel, even if content contribution
	conference Content channel video must also be
from endpoints is disabled in the per-conference	enabled in the per-conference configuration.
configuration.
Disabled: This endpoint is not allowed to
contribute the conference channel, even if
content contribution from endpoints is enabled in
the per-conference configuration.
	87