TANDBERG MSE 8510, MCU 4500 manual Mcu, Other participant is present is most appropriate for

Indicates the visibility of the conference on the auto attendant and the web interface. The options are:

: the conference will be listed in the auto attendant and be visible to all users of the web interface

: the conference will not be listed in any auto attendant except for auto attendants specifically set to show it. The conference will also only be visible in the web interface to the conference owner and to the admin user

For private conferences not visible on an auto attendant, participants will still be able to join the conference if they know the PIN.

Note that only admin users can choose which conferences are visible on a given auto attendant.

This setting is only available for schedules conferences. For ad hoc conferences, whether or not they are listed on the auto attendant depends on the settings of that auto attendant. For more information, refer to Adding and updating an auto attendant.

The encryption setting for this conference, if you	If encryption is enabled unit-wide (through the
have the encryption feature key enabled.		>	page), you can set one of:
			: encryption must be used for
		this conference
			: encryption is optional for this
		conference
	This setting is grayed-out if encryption is disabled
	on the	>	page.
	Note that to be able to use encryption, the
	Encryption feature key must be present on the
	MCU.
Prevents or permits conference participants	You may wish to prevent participants from
changing their view layout or focused participant	changing their view layout in a managed
using Far-End Camera Controls or DTMF tones.	conference, or classroom environment.
	This is a per-conference option, but
	FECC/DTMF layout control may still be enabled
	or disabled on a per-participant basis using the
	web interface.
	When calling out to endpoints, the endpoints'
	layout control configuration overrides this
	setting, and therefore it applies only to endpoints
	which connect to the conference via an auto
	attendant or by dialing in directly.
Indicates when the MCU should invite any pre-	Select which option fits your requirements best.
configured endpoints into a conference. The	Calling pre-configured endpoints at the start of the
options are:	conference is most appropriate for repeating
	conferences with a particular start time.
Pre-configured participants will be called	Calling pre-configured endpoints when at least one
as soon as the conference starts.	other participant is present is most appropriate for
	permanent conferences; such conferences are
	typically un-attended for much of the time, and it
Pre-configured endpoints will only be	may only be useful to invite pre-configured
called after at least one other participant	endpoints when others are present.
joins the conference.	This setting only applies to scheduled

conferences.

30