Installation Instructions

REVERSING THE DOOR SWING (CONT.)

2

REMOVE THE FRESH FOOD DOOR

Tape the door shut with masking tape.

Remove the center hinge and shim by removing the screws (some models have lock washers with each screw). Lift up the hinge to remove it.

NOTE: Some models have a washer between

the center hinge and the top of the fresh food door. Do not lose.

Remove the tape holding the door shut.

Lift the fresh food door up and off the bottom hinge.

Set the door outside-up on a non-scratching surface.

NOTE: When removing the door, watch for washer(s) between the bottom hinge and the bottom of the fresh food door that may stick to the door. Do not lose.

CAUTION:Do not let door drop

to the floor. To do so could damage the door stop.

3

TRANSFER TOP HINGE TO

THE LEFT

Using a putty knife with the edge covered with masking tape, remove the plug buttons. Be careful of the paint finish.

Reinstall the plug button on the right side by inserting it into the holes vacated by the top hinge screws.

Reassemble the top hinge and shim on the left side, turning the screws just enough to hold the hinge in place.

10

Page 10
Image 10
GE GTR12HBX, GTR10HAX Remove the Fresh Food Door, Transfer TOP Hinge to Left, Tape the door shut with masking tape