Safety Instructions
About washer features.
The Agitator Cap (on some models)
The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on.
Fabric Softener Dispenser (on some models)
Operating Instructions
| OPTIONS |
| Set when adding |
OFF | FABRIC SOFTENER |
| and/or POWER RINSE |
The fabric softener dispenser automatically releases liquid fabric softener. Setting the knob ensures that it dispenses at the proper time.
Do not stop the washer or raise the lid during the first spin. This will cause the dispenser to empty too soon.
To use, follow these steps:
1Make sure dispenser is securely attached to agitator.
2Use only diluted liquid fabric softener. Pour into dispenser, using amount recommended on package.
Never pour fabric softener directly on items. It may stain them.
3Add water to dispenser until it reaches the maximum fill line.
Do not pour anything into the agitator if the agitator cap or dispenser is removed.
4Select FABRIC SOFTENER setting knob to activate the cycle.
Note: Fabric softener will not dispense if the knob is in the “OFF” position.
Tips
Cleaning the Fabric Softener Dispenser (on some models)
1Remove the dispenser from the top of the agitator.
Troubleshooting
Consumer Support
Separate for cleaning
2
3
4
5
Separate the dispenser cup from the cover by grasping the top and pushing down on the inside of the cup with your fingers. Dispenser cup will pop free from the cover.
To clean the dispenser, soak both the dispenser cup and the dispenser cover in the following solution:
1 US gallon (3.8 liters) warm water
1/4 cup (60 ml)
1 cup (240 ml) bleach
If necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush; you may roughen the surface of the dispenser.
Rinse and reassemble dispenser. Place dispenser back on the agitator.
6
