97958IN 8/19/03 8:09 AM Page 12
Troubleshooting
COMPUTER DOES NOT RECOGNIZE HUB:
1.Check to be sure the hub and the cable are securely attached to the computer.
2.Try turning off the computer and disconnect the hub. While the hub is disconnected, disconnect any devices connected to the hub. Reconnect the hub and power the computer back up and let the computer try to recognize the hub. If the hub is recognized, reconnect the devices one at a time.
3.If hub is still not recognized, click on Start, select Settings, then select Control Panel, then select Add New Hardware. Follow the instructions from the
4.After trying these suggestions, try the hub on another com- puter to see what type of results are produced. If the hub works on the alternate computer, then the issue lies in the first computer.
11
