GE JB400SPSS dimensions GE 30 Free-Standing Electric Range, KW Rating, 240V, 10.5, 208V

JB400SP

GE® 30" Free-Standing Electric Range

Dimensions and Installation Information (in inches)

KW Rating

240V	10.5
208V	7.9

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

30-7/8"

All 30" GE gas and electric range backguards are 30-7/8" wide.*

Note: 30" ranges conform to U.L. requirements

for 0" spacing from adjacent­ walls below countertops. To reduce possible scorching of walls, ­engineering ­recommends a minimum of 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation.

*Except these models: JGBS07, JGBS04, JGBP90, all GE Profile free-standing electric and gas ranges

Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions.

			30
2-1/2
			25
Acceptable electrical				2-1/2
	outlet area
7
			14-1/2
				7-1/2
		A*
	29-7/8
			On models with baking or warming
			drawers, electrical outlet must not
			be in this area.
			Dimension from wall to front of closed
25-3/8
			oven door handle is 27-3/8 on models
			PB910/900 and 27-3/4 on models
47-5/8			JBP89/84/81.
			*A is 46-7/8 on models JBP89/84/81 and
			46-1/2 on models JB988/968/910/900
		All GE ranges are equipped with		Listed by
		an Anti-Tip device. The installation
		of this device is an important,		Underwriters
		required step in the installation		Laboratories
		of the range.

Specification Revised 5/09 321539