GE JBP49 owner manual Special features of your oven control, Operating Instructions, Hour Shutdown

Special features of your oven control. ge.com

Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset.

12-Hour Shutdown

Safety Instructions

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

If you wish to turn OFF this feature, follow the steps below.

Touch the BAKE and BROIL HI/LO pads at the same time until the display shows SF.

Touch the DELAY START pad until no shdn (no shut-off) appears in the display.

Touch the START pad to activate the no shut-off and leave the control set in this special features mode.

Operating Instructions

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Celsius selections.

Touch the BAKE and BROIL HI/LO pads at the same time until the display shows SF.

Touch the COOKING TIME and BROIL HI/LO pads at the same time. The display will show F (Fahrenheit).

Touch the COOKING TIME and BROIL HI/LO pads again at the same time. The display will show C (Celsius).

Care and Cleaning

Touch the START pad.

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual 6-second beep may be canceled.

To cancel the 6-second beep:

Touch the BAKE and BROIL HI/LO pads at the same time until the display shows SF.

Touch the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Touch the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Touch the START pad.

Troubleshooting Tips

Cook and Hold

Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.

To activate this feature, follow the steps below.

Touch the BAKE and BROIL HI/LO pads at the same time until the display shows SF.

Touch the COOKING TIME pad. The display will show Hld OFF.

Touch the COOKING TIME pad again to activate the feature. The display will show Hld ON.

Touch the START pad to activate
the cook and hold feature and
leave the control set in this
special features mode.	13

Consumer Support