JBP89SM

GE® 30" Free-Standing Double Oven Range

Dimensions and Installation Information (in inches)

KW Rating

240V

14.2

 

 

208V

10.7

 

 

Breaker Size

40 Amps

Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profileor GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

30-7/8"

All 30" GE gas and electric range backguards are 30-7/8" wide.*

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possible scorching of walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation.

*Except these models: JGBS07, JGBS04, JGBP90, all GE Profile free-standing electric and gas ranges

Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions.

 

30

2-1/2

 

 

25

Acceptable electrical

2-1/2

outlet area

 

 

7

 

14-1/2

29-7/8

7-1/2

A*

 

 

On models with baking or warming

 

drawers, electrical outlet must not

 

be in this area.

25-3/8

Dimension from wall to front of closed

oven door handle is 27-3/8 on models

 

JB988/968/910/900 and 27-3/4 on models

47-5/8

JBP89/84/81.

*A is 46-7/8 on models JBP89/84/81 and 46-1/2 on models JB988/968/910/900

All GE ranges are equipped with

Listed by

an Anti-Tip device. The installation

of this device is an important,

Underwriters

required step in the installation

Laboratories

of the range.

 

Specification Revised 10/08

321596

Page 1
Image 1
GE JBP89SM dimensions KW Rating 240V 14.2 208V 10.7 Breaker Size, Specification Revised 10/08