A-3
Cisco 12404 Internet Router Installation and Configuration Guide
OL-11636-01
AppendixA Technical Specifications
Product Architecture
Specifications
Tabl e A-2 lists Cisco 12404 Internet router physical specifications. Tab le A-3
lists the environmental specifications.
Feature Description
Power
Requirements
110V AC power, sufficient to handle three OC192c /10GE
capable line cards and one 10G capable RP.
Total power supplied to the system should not exceed
1200VA
Two AC or DC power supplies in redundant configuration
should be able to support the entire power needs of the
chassis.
Power Supply
Redundancy
Redundant and load sharing AC power entry module (PEMs),
or
Redundant and load sharing DC PEMs and DC power
distribution units (PDUs)
Route
Processors
Supports up to 2 RPs per system
The second RP can be used in any slot1
The first RP is inserted in slot 0 (1.25 inch height) see
Figure A-4
Route
Processor
Redundancy
Supports online insertion and removal, hot swappable RP
redundancy
Switch Fabric The switch fabric supports up to 80 Gbps of capacity
NEBS The Cisco 12404 Inernet Router is designed to comply with
NEBS Level 3 certification
1. A narrow card filler panel must be used to ensure proper air flow through the chassis and
electromagnetic compatibility (EMC)
TableA-1 Cisco 12404 Internet Router Product Architecture (continued)