GE JDP39, JDS28 Replacing the Oven Door, Check for Proper Installation ANTI-TIP Bracket

Installation Instructions

INSTALL THE RANGE (CONT.)

REPLACING THE OVEN DOOR

NOTE: The oven door is heavy. You may need help lifting the door high enough to slide it into the hinge slots. Do not lift the door by the handle.

6 Lift the oven door by placing one hand on each side. The door is heavy, so you may need help. Do not lift the door by the handle.

7With the door at the same angle as the removal position (halfway between the closed and broil stop position, seat the notch of the hinge arm into the bottom edge of the hinge slot. The notch of the hinge arm must be fully seated into the bottom of the slot.

Hinge arm

Bottom edge of slot

9Push the hinge locks up against the front frame of the oven cavity, to the locked

position.

Hinge in locked position

Notch of hinge securely fitted into bottom of hinge slot

10Close the oven door.

11CHECK FOR PROPER

INSTALLATION OF

ANTI-TIP BRACKET

Lower the oven door and gently apply medium force at the handle end until movement of the range is detected. Continue pressing until the anti-tip bracket is engaged and movement stops. A small amount of movement is acceptable at the back of the range top, but it should be stable and not tip once the anti-tip bracket is engaged.

Hinge notch

8

Open the oven door as far as it will open.

12