How to Delay the Start of Cleaning

Press the SELF CLEAN pad.

Using the INCREASE or DECREASE pads, enter the desired clean time.

Press the DELAY START pad. The earliest start time you can set will appear in the display.

Using the INCREASE or DECREASE pads, enter the time of day you want the clean cycle to start.

Press the START pad.

The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

When the LOCKED DOOR light is off, open the door.

Safety Instructions Operating Instructions

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the SELF CLEAN pad.

If the shelves become hard to slide, wipe the shelf supports with cooking oil.

Care and Cleaning Troubleshooting Tips Customer Service

21

Page 21
Image 21
GE JGSP22 owner manual After a Clean Cycle, How to Delay the Start of Cleaning