FlashTrax Tutorial

Before You Begin

Before starting the tutorial, we need to make sure your FlashTrax has power. Insert the battery and connect the AC Power Adapter as described in the previous section. Now that your FlashTrax is charging, it’s time to start the tutorial.

Setting the Date

The first thing we’re going to do is set the clock on your FlashTrax. This will give you a chance to see how the FlashTrax interface works – don’t worry, we’ll get to the exciting part soon enough.

It’s important to keep the date set correctly on your FlashTrax because automatic copies are labeled based on the current date. See Automatic Copying: Advanced Features later on in this manual for more information.

1. Power on

Flip open the screen on your FlashTrax, then push and hold the POWER button for about three seconds. The screen will light up and display the SmartDisk logo for a moment. In a few seconds you’ll be looking at the File Explorer.

2. Enter Setup Mode

We’ll come back to the File Explorer in a moment, but right now we’re going to enter Setup Mode. Just push once on the Mode button on your FlashTrax, and the Mode Selection Window will appear.

Push the Down arrow on your FlashTrax once to enter Setup Mode.

6

Page 9
Image 9
SmartDisk MP3 manual FlashTrax Tutorial, Before You Begin, Setting the Date, Power on, Enter Setup Mode