Operating Instructions Safety Instructions

Using the oven controls.

(Throughout this manual, features and appearance may vary from your model.)

Features and appearance may vary.

Oven Control, Clock and Timer Features and Settings

BAKE Pad

OVEN LIGHT ON/OFF Pad

Touch to select the bake function.

Touch to turn the oven light on or off.

Consumer Support Troubleshooting Tips Care and Cleaning

BROIL HI/LO Pad

Touch to select the broil function.

CONVECTION BAKE Pad

Touch to select baking with the convection function.

CONVECTION ROAST Pad

Touch to select roasting with the convection function.

PROOF Pad

Touch to select a warm environment useful for rising yeast-leavened products.

START Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations.

 

If “F– and a number or letter” flash in the display and

 

the oven control signals, this indicates a function error

 

code. Touch the CLEAR/OFF pad. Allow the oven to cool for

 

one hour. Put the oven back into operation. If the function error

 

code repeats, disconnect the power to the oven and call for

 

service.

 

If your oven was set for a timed oven operation and a

 

power outage occurred, the clock and all programmed

 

functions must be reset.

 

The time of day will flash in the display when there has

 

been a power outage.

 

SELF CLEAN LO/STD Pad

 

Touch to select self-cleaning function. See the

10

Using the self-cleaning oven section.

DELAY START Pad

Use along with COOK TIME or SELF CLEAN LO/STD pads to set the oven to start and stop automatically at a time you set.

COOK TIME Pad

Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

CLEAR/OFF Pad

Touch to cancel ALL oven operations except the clock, timer and control lockout.

CLOCK Pad

Touch before setting the clock.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

KITCHEN TIMER ON/OFF Pad

Touch to select the timer feature.

PROBE Pad

Touch when using the probe to cook food.

WARM Pad

Touch to keep cooked foods warm. See the How to Set the Oven for Warming section.

CONTROL LOCKOUT

The control lockout is 9 and 0. Touch and hold the 9 and 0 pads at the same time for 3 seconds.

Page 10
Image 10
GE JGSP48 owner manual Using the oven controls, Operating Instructions Safety Instructions, Self Clean LO/STD Pad