Instructions
Care and cleaning of the range.
Burner Grates and Vent Grille
Instructions Safety
Porcelain enamel burner grates and the vent grille should be washed regularly and, of course, after spillovers.
Wash them in hot, soapy water and rinse with clean water. You may also use abrasive cleaners and scouring pads to clean burner grates and the vent grille. Dry the grates and grille with a cloth— don’t put them back on the cooktop wet.
grate. The finish on the grate may chip without cookware to absorb the heat.
After cleaning, replace the center grille first. Replace the side grates so that the notches lock over the tabs on the center grate. Make sure the grates are positioned securely over the burners and that they are stable and level.
Rubber Grate Feet
Cleaning Operating
To get rid of
Although they’re durable, the grates and grille will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures.
Do not operate a burner for an extended period of time without cookware on the
For stability, your cooktop has rubber feet on the burner grates. If any of these rubber feet should become damaged or lost, replace them immediately.
To order replacement rubber grate feet, please call our
National Parts
Center . . . . . . . . . . . . . . . 800.626.2002 (U.S.)
888.261.3055 (Canada)
Rubber Grate Feet . . . . . . .#WB02T10101
Consumer Support Troubleshooting Tips Care and
Socket
Receptacle
Bulb
Tab
Glass cover
32
Oven Light Bulbs (on some models)
NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the oven at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
For your safety, do not touch a hot bulb with bare hands or a damp cloth.
To remove:
Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket.
Using gloves or a dry cloth, remove the bulb by pulling it straight out.
To replace:
Use a new
Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers.
Receptacle
Use gloves or cloth
Push the bulb straight into the receptacle all the way.
Place the tabs of the glass cover into the grooves of the socket. Turn the glass cover clockwise 1/4 turn to engage.
For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.
Reconnect electrical power to the oven.
