Special features of your oven control.

Tone Volume (on some models)

+

This feature allows you to adjust the tone

 

 

 

 

volumes to a more acceptable volume. There are

 

 

three possible volume levels.

 

 

 

 

 

 

Touch the BROIL HI/LO and BAKE

 

 

pads at the same time for 3 seconds,

 

 

until the display shows SF.

 

 

Touch the OVEN LIGHT ON/OFF pad.

 

 

The display will show 2 BEEP. This is

 

 

the high volume level.

 

 

Touch the OVEN LIGHT ON/OFF pad

 

 

again. The display will show 3 BEEP.

 

 

This is the loudest volume level.

Touch the OVEN LIGHT ON/OFF pad again. The display will show 1 BEEP. This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

Choose the desired sound level (1 BEEP, 2 BEEP, 3 BEEP).

Touch the START pad to activate the level shown.

+

12-Hour, 24-Hour or Clock Blackout

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

Touch the BROIL HI/LO and BAKE pads at the same time for 3 seconds until the display shows SF.

Touch the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, touch the START pad.

Touch the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the START pad.

Care and Cleaning Operating Instructions Safety Instructions

Touch the CLOCK pad once. The

NOTE: If the clock is in the black-out mode you

display will show 12 hr. If this is

will not be able to use the Delay Start function.

the choice you want, touch the

 

START pad.

 

Consumer Support Troubleshooting Tips

+

Cook and Hold (on some models)

Your control has a cook and hold feature that

 

keeps cooked foods warm for up to 3 hours after

 

Timed Baking or Roasting is finished

NOTE: This feature can only be programmed to work with Timed Baking or Roasting. (See the Using the timed baking or roasting features section.) After Timed Baking or Roasting has automatically stoped, the programmed cook and hold will automatically start.

To activate this feature for use after Timed Baking or Roasting, follow the steps below.

Touch the BROIL HI/LO and BAKE pads at the same time for 3 seconds until the display shows SF.

Touch the COOK TIME pad. The display will show Hld OFF.

Touch the COOK TIME pad again to activate the feature. The display will show Hld ON.

Touch the START pad to activate the cook and hold feature and leave the control set in this special features mode.

NOTE: The control will beep every 6 seconds

if the Cook and Hold feature is set to remind you that food is in the oven. Touch the CLEAR/OFF pad and remove food when desired. This reminder will not work if the tones at the

end of a timed cycle were cancelled. See the Tones at the End of a Timed Cycle in this Special Features section.

28

Page 28
Image 28
GE JGSP48 owner manual Hour, 24-Hour or Clock Blackout, Start pad