Instructions

Using the clock and timer.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

Press the CLOCK pad.

Press the HOUR and MIN + or pads to set the time of day.

Press the START pad.

Care and Cleaning Operating Instructions

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

To Set the Timer

Press the KITCHEN TIMER

ON/OFF pad.

Press the HOUR and MIN + or pads until the amount of time you want shows in the display.

If you make a mistake, press KITCHEN TIMER ON/OFF and begin again.

Press the START pad.

After pressing the START pad, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is pressed.

The 6 second tone can be canceled by following the steps in the Special features of your oven control section under Tones at the End of a Timed Cycle.

Customer Service Troubleshooting Tips

To Reset the Timer

If the display is still showing the time

If the remaining time is not in the display

remaining, you may change it by pressing

(clock, delay start or cooking time are in

the KITCHEN TIMER ON/OFF pad, then

the display), recall the remaining time by

press the HOUR and MIN + or pads until

pressing the KITCHEN TIMER ON/OFF pad

the time you want appears in the display.

and then pressing the HOUR and MIN +

 

or pads to enter the new time you want.

To Cancel the Timer

Press the KITCHEN TIMER ON/OFF pad twice.

14

Page 14
Image 14
GE JRP15, JKP15 Using the clock and timer, To Set the Clock, To Set the Timer, To Reset the Timer, To Cancel the Timer

JRP15, JTP17, JKP15 specifications

GE's JKP15, JTP17, and JRP15 models stand out as exceptional units in the landscape of commercial and industrial gas turbines, each designed to cater to various operational needs. These turbines incorporate advanced technologies and innovations, making them suitable for a wide range of applications from power generation to mechanical drive.

The GE JKP15 turbine is renowned for its efficient energy conversion, showcasing a robust design that ensures high reliability and longevity. It typically features a modular layout, which allows for easy maintenance and reduced downtime, leading to enhanced operational efficiency. The JKP15 utilizes state-of-the-art materials and cooling technologies to maintain performance under high thermal conditions, ensuring optimal efficiency rates and lower emissions.

In contrast, the JTP17 model is designed for larger-scale applications. This turbine integrates advanced aerodynamic designs that increase its efficiency and performance under various load conditions. The JTP17 is equipped with a digital control system, which enhances operational flexibility and process optimization. Its combustion system is engineered to minimize NOx emissions, making it compliant with stringent environmental regulations, thus enhancing its appeal to environmentally conscious operators.

The JRP15, on the other hand, is a versatile model that serves both the power generation sector and industrial applications. It features high operational versatility, allowing for swift changes between different fuel types. The JRP15 is made with advanced engineering techniques, which contribute to its high reliability and low maintenance needs. Its ability to handle fluctuating load demands makes it a prime choice for operators seeking both capacity and efficiency.

All three models share a commitment to advanced monitoring technologies that use real-time data analytics to predict maintenance needs, enhancing their reliability and lifespan. GE's focus on integrating IoT capabilities allows for comprehensive system integration and energy management, paving the way for smarter energy solutions.

In summary, GE's JKP15, JTP17, and JRP15 turbines collectively represent the pinnacle of engineering excellence in gas turbine technology. Their distinct features, from modular designs and digital control systems to low-emission combustion technologies, underscore GE's commitment to innovation, efficiency, and sustainability in energy production. Whether for power generation or industrial uses, these turbines offer reliable solutions that meet the diverse needs of today’s energy landscape.