GE JKP2027 owner manual Support, Instructions Operating Instructions Care, Tips Consumer

www.GEAppliances.com

Non-Self-Clean Oven Interior (on some models)

Safety

With proper care, the porcelain enamel finish on the inside of the oven—top, bottom, sides, back and inside of the door—will stay new-looking for years.

Let the oven cool before cleaning. We recommend that you wear rubber gloves when cleaning the oven.

Soap and water will normally do the job. Heavy spattering or spillovers may require cleaning with a mild abrasive cleaner. Soap-filled steel-wool pads may also be used.

Do not allow food spills with a high sugar or acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface. They may cause a dull spot even after cleaning.

Household ammonia may make the cleaning job easier. Place 1/2 cup in a shallow glass or pottery container in a cold oven overnight.

The ammonia fumes will help loosen the burned-on grease and food.

If necessary, you may use an oven cleaner. Follow the package directions.

■Do not spray oven cleaner on the electrical controls and switches because it could cause a short circuit and result in sparking or fire.

■Do not allow a film from the cleaner to build up on the temperature sensor—it could cause the oven to heat improperly. (The sensor is located at the top of the oven.) Carefully wipe the sensor clean after each oven cleaning, being careful not to move the sensor as a change in its position could affect how the oven bakes.

■Do not spray any oven cleaner on the oven door, handles or any exterior surface of the oven, cabinets or painted surfaces. The cleaner can damage these surfaces.

Instructions Operating Instructions Care

Painted Surfaces

Clean with soap and water or a vinegar	Do not use commercial oven cleaners,
and water solution.	cleansing powders, steel wool or harsh
	abrasives on any painted surface.

Glass Surfaces

To clean the outside glass finish, use a	Do not allow the water or cleaner
glass cleaner. Rinse and polish with a	to run down inside the oven door
dry cloth.	while cleaning.
Stainless Steel Surfaces (on some models)

and Cleaning Troubleshooting

Do not use a steel-wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm sudsy water, a stainless steel cleaner such as Kleen King® or an all-purpose liquid or spray cleaner. Always scrub in the direction of the grain. Rinse thoroughly with a sponge or cloth and clean water. Dry with a soft, clean cloth.

After cleaning, use a stainless steel polish, such as Stainless Steel Magic®, Revere Copper and Stainless Steel Cleaner® or Wenol All Purpose Metal Polish®. Follow the product instructions for cleaning the stainless steel surface.

Tips Consumer

Oven Heating Elements

Do not clean the bake element or the broil	To clean the oven floor, gently lift
element. Any soil will burn off when the	the bake element. Clean with warm
elements are heated.	soapy water.

21

Support