www.GEAppliances.com

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will

NOTE:

sound followed by one beep every 6 seconds until

On models with touch pad controls for both

the CLEAR/OFF pad is pressed. This continuous

ovens, this cancels the end of cycle tone for

6-second beep may be canceled.

both ovens.

 

Safety Instructions

To cancel the 6-second beep:

Press the upper oven BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

On models with oven knob(s), this feature is not available for the lower oven.

Operating Instructions

Press the START pad.

12-Hour, 24-Hour or Clock Black-Out

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

Press the upper oven BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.

Press the CLOCK pad once. The display will show 12 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, press the START pad.

NOTE: If the clock is in the black-out mode, you will not be able to use the Delay Start function.

7

Care and Cleaning Troubleshooting Tips Consumer Support

Page 7
Image 7
GE JKP2027 Care and Cleaning Troubleshooting Tips Consumer Support, Tones at the End of a Timed Cycle, Safety Instructions