Lamp Replacement
Model JV347 has a lamp cover.
The lamp cover need not be removed for lamp removal or installation.
CAUTION: Let the lamp cool completely before removing. A warm or hot bulb may break if touched with a moist cloth or hand.
Remove the lamp and replace with an ordinary screw- base lamp bulb NOT MORE THAN 60 WATTS.
To remove the lamp cover, if desired:
•Press the sides with 2 fingers until the side prongs are released.
•Lift the lamp cover and slide toward you in one motion.
To replace the lamp cover:
•Insert the prong located at the end of the cover into the top opening.
•Gently push the cover up and press the sides to fit the side prongs into the side openings.
•Release and the cover will lock in position.
9
