Use and Care of Recirculation Hood Model JN327 and Ventilating Hood Models JV327, JV337 & JV347
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING.
A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
B. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
CAUTION— For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
When you get your new hood…
•Have it installed and properly grounded by a qualified technician in accordance with the installation instructions.
•Have the installer show you the location of the hood circuit breaker or fuse and mark it for easy reference.
•Take the time to read our suggestions for best use.
A. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including
B. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guidelines and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
C. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
D. Ducted fans must always be vented to the outdoors.
WARNING—To reduce the risk of fire, use only metal ductwork.
When using your hood…
•Never leave surface units unattended at high settings. Boilover causes smoking and greasy spillovers that may ignite and spread if hood is used. Use surface unit heat settings recommended by the manufacturer and
•Never use your cooking appliance for warming or heating the room. The electrical wiring of your range hood may not withstand the resulting excessive heat.
•Keep the hood clean and clean grease filter
or replace charcoal filter as recommended to maintain good venting and to avoid grease fires.
A. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
B. Always turn hood ON when cooking at high heat or when cooking flaming foods.
C. Clean ventilating fans frequently. Grease should
not be allowed to accumulate on fan or filter.
D. Use proper pan size. Always use cookware appropriate for the size of the surface element.
(continued next page)
GE Quality Product
