CARE AND
Control Knobs
The control knobs may be removed for cleaning.
To remove knob, pull it straight off the stem. If knob is difficult to remove, place a thin cloth (like a handkerchief) or a piece of string under and around the knob edge and pull up.
Wash knobs in soap and water but do not soak. Avoid getting water down into the knob stem holes.
To replace knob, locate the groove in each side of the knob stem. One of the grooves contains a spring clip and the other groove is clear. Locate the molded rib inside the knob. Fit the molded rib into the clear groove on the knob stem.
CLEANING
—
M
Spring C
e
Glass Control Panel
The glass control panel on your cooktop has been tempered to withstand sudden temperature changes during cooking. Give it the normal care you would give any glass material.
While it is
If the glass is hot, wipe up spills with a dry cloth or paper towel. When the
surface has cooled, wash, rinse and dry it. Alternately, when the glass is— cool, spray it with glass or window cleaner. Avoid the use of cleaning
powders or harsh abrasives that may scratch the surface.
Surface Units
Spatters and spills burn away when coils are heated. At the end of the meal, heat soiled surface units at HI. Let soil burn off for about one minute, then switch surface units to OFF.
Avoid getting any cleaning materials on the coils. If you do, wipe off with a damp paper towel before heating the surface unit.
Clean the area under the drip panhings often.
CAUTION: Be sure all controls are turned to OFF and surface units are cool before attempting to lift or remove them.
After lifting the
Clean the area below the unit. Rinse all washed areas— with a damp cloth or sponge.
10
