Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Before You Call For Service…

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem

Possible Causes

What To Do

 

 

 

TEMP LTD appears

Time-Out feature activated.

Allow the surface unit(s) to cool for 1/2 to 1 hour

in the display

 

before using again.

 

 

 

Surface unit is

Cooktop feature activated.

The cooktop has a rapid heat-up feature and is

glowing hot when it

 

designed to do this.

should be on a low

 

 

power setting

 

 

 

 

 

“F” and a number

You have a function

Write down the “F:- - -” and touch the CONTROL

appear in the display

error code.

LOCK pad. Disconnect the power to the cooktop and

and the cooktop beeps

 

then reconnect. If an F-code appears again, call for

 

 

service.

 

 

 

16

Page 16
Image 16
GE JP969, JP939 owner manual Before You Call For Service…

JP939, JP969 specifications

The GE JP969 and JP939 are advanced jet engine variants designed to power the next generation of regional and narrow-body aircraft. With a commitment to enhanced efficiency, reliability, and performance, these engines incorporate cutting-edge technologies that significantly improve the overall flying experience while meeting stringent environmental regulations.

One of the defining features of the JP969 and JP939 is their high bypass ratio, which not only optimizes fuel efficiency but also minimizes noise pollution. By maximizing the amount of air that flows around the engine core, these engines achieve a perfect balance between thrust and environmental sustainability. This characteristic is essential for modern aviation as airlines seek to reduce their carbon footprints while maintaining operational efficiency.

Incorporating advanced materials technology, both the JP969 and JP939 benefit from lightweight composite fan blades and advanced alloys that can withstand extreme temperatures. This not only enhances the engines' durability but also contributes to their ability to maintain performance at high altitudes and during diverse operating conditions.

The engine control systems of the JP969 and JP939 are equipped with sophisticated digital engine control technology, enabling real-time monitoring and adjustments to optimize performance. This system enhances the operational flexibility of the engines, allowing them to adapt to varying flight profiles without compromising on efficiency or reliability.

Another key characteristic of these engines is their maintenance-friendly design. With an emphasis on reducing downtime, the JP969 and JP939 allow for easier access to critical components, thereby streamlining maintenance procedures. This feature is crucial for airlines aiming to maximize fleet availability and reduce operational costs.

Moreover, both engines incorporate state-of-the-art aerodynamics, with intricately designed fan blades and internal airflow paths that reduce drag and enhance overall performance. The thoughtful engineering behind these designs not only improves thrust but also contributes to reduced fuel consumption, making the JP969 and JP939 highly appealing for modern operators.

In conclusion, the GE JP969 and JP939 embody an impressive blend of efficiency, reliability, and advanced technology. Their high bypass ratio, innovative materials, sophisticated control systems, maintenance-friendly design, and aerodynamically optimized structures make them ideal choices for airlines looking to enhance their fleet's performance while adhering to environmental and operational standards. As aviation continues to evolve, these engines represent a significant leap forward in the pursuit of sustainable and efficient air travel.