Adjust the oven thermostat—Do it yourself!

www.GEAppliances.com

You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.

Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20–40 degrees.

NOTE: This adjustment will only affect baking and roasting temperatures; it does not affect broiling, convection or self-cleaning temperatures. The adjustment will be retained in memory after a power failure.

Safety Instructions

To Adjust the Thermostat

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the BAKE pad for the oven which you want to use. A two-digit number shows in the display.

Press BAKE again to alternate between increasing and decreasing the oven temperature.

The oven temperature can be adjusted up to (+) 35°F hotter or (-) 35°F cooler. Press the number pads the same way you read them. For example, to change the oven temperature 15°F, press 1 and 5.

When you have made the adjustment, press the START pad to go back to the time of day display. Use your oven as you would normally.

Operating Instructions Care and

The type of margarine will affect baking performance!

Most recipes for baking have been developed using high-fat products such as butter or margarine (80% fat). If you decrease the fat, the recipe may not give the same results as with a higher-fat product.

Recipe failure can result if cakes, pies, pastries, cookies or candies are made with low-fat spreads. The lower the fat content of a spread product, the more noticeable these differences become.

Federal standards require products labeled “margarine” to contain at least 80% fat by weight. Low-fat spreads, on the other hand, contain less fat and more water. The high-moisture content of these spreads affect the texture and flavor of baked goods. For best results with your old favorite recipes, use margarine, butter or stick spreads containing at least 70% vegetable oil.

19

Cleaning Troubleshooting Tips Consumer Support

Page 18 Page 20
Page 19
Image 19
GE JT912, JT952 owner manual Adjust the oven thermostat-Do it yourself, Type of margarine will affect baking performance
Page 18 Page 20

JT912, JT952 specifications

The GE JT912 and JT952 are advanced turbofan engines designed to provide optimal performance and efficiency for a variety of commercial and military aircraft. Both engines belong to the GE family of engines, which is known for its commitment to innovation and reliability in aviation technology.

The GE JT912 is a high-bypass turbofan engine that features a two-shaft configuration aimed at maximizing performance and efficiency. It is primarily designed for regional and business jets, offering a thrust range suitable for various applications. One of the standout features of the JT912 is its efficient fan design, which incorporates composite fan blades and advanced aerodynamic shaping. This design not only enhances fuel efficiency but also reduces noise, aligning with the industry's growing focus on eco-friendliness.

In terms of materials, the JT912 employs advanced nickel and titanium alloys in its construction, which contribute to enhanced durability and performance under high temperatures. The engine is also equipped with state-of-the-art digital engine control technology, allowing for better monitoring and optimization of engine performance throughout the flight profile. The integration of this technology results in a reduced maintenance burden and extended time between overhauls, attributes that are crucial for operators looking to manage costs effectively.

On the other hand, the GE JT952 engine is tailored for larger aircraft, offering higher thrust capabilities. It features similar technological advancements, including an advanced high-pressure compressor that optimizes the air intake and enhances overall engine performance. The JT952 is designed with a focus on reliability and efficiency, making it suitable for both commercial aviation and military applications.

An important feature of the JT952 is its modular design, which simplifies maintenance and repair processes. This modularity allows for quicker turnaround times during servicing and reduces overall downtime for operators. Additionally, the engine is designed to meet stringent environmental regulations, minimizing emissions and noise levels.

In summary, both the GE JT912 and JT952 engines represent the forefront of turbofan technology, combining advanced materials, innovative design features, and state-of-the-art control systems. Their focus on efficiency, reliability, and reduced environmental impact makes them valuable assets for modern aviation, catering to a wide range of operational needs. These engines exemplify GE's dedication to pushing the boundaries of aerospace engineering and supporting the future of flight.
Top Page Image Contents