IMPORTANT: After installation, peel off the transparent protective film stripping from the decorative trim on the front of the hood. (See Fig. 12.)
B. ELECTRICAL CONNECTION
1.Be sure the power supply is disconnected before making electrical connections.
2.Remove the connection box cover located on the left side of the fan unit.
3.Attach the power supply through the knockout hole in the back or top of the hood.
4.Connect the colored incoming power supply lead to the stripped black lead and connect the incoming white neutral lead to the stripped white lead in the connection box as shown in Figs. 13 and 14. Make connections in the hood in accordance with local codes.
WARNING: IMPROPER CONNECTION OF ALUMINUM HOUSE WIRING TO THESE COPPER LEADS CAN RESULT IN A SERIOUS PROBLEM. USE ONLY CONNECTORS DESIGNED FOR JOINING COPPER TO ALUMINUM AND FOLLOW THE MANUFACTURER’S RECOMMENDED PROCEDURE CLOSELY.
5.A ground lug is provided for proper grounding of ~he hood
6.All electrical connections should be inspected carefully before the power is turned on to make certain that none have come loose during shipment.
7.Reinstall the connection box cover.
8.Install a lamp (not supplied with hood in the socket.)
(CAUTION: Maximum wattage on the lamp should not exceed 60 watts.)
Protective Film
FIGURE 12
Wire nuts
lored leads
Power supply
Grounding lug
FIGURE 13
Cut off excess wire length so wires will
be easy to position under cover
I
ction ver ng
Pow;r supply \ Mounting screw connection
box cover
FIGURE 14
8
