![Instructions Safety Instructions](/images/new-backgrounds/66331/663313x1.webp)
Instructions Safety Instructions
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
PLEASE NOTE: The downdraft vent system you have purchased was designed to be used with GE, GE Profile and GE Profile Performance cooktops listed in this manual.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
WARNING—TO REDUCE THE RISK OF FIRE,
![READ ALL INSTRUCTIONS BEFORE USING.](/images/new-backgrounds/66331/663313xi3.webp)
ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Consumer Support Troubleshooting Tips Installation Instructions Operating
A. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
B. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
■Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including
■Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of
■When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
■Ducted fans must always be vented to the outdoors.
■To reduce the risk of fire, use only metal ductwork.
■PVC sewer pipe can be used as duct under concrete slab if allowed by local code board.
■This unit must be grounded.
2