IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

SAFETY PRECAUTIONS

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

B.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

C.Do not use this unit with any solid-state speed control device.

D.This unit must be grounded.

CAUTION – For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

WARNING – TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING*:

A.SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately,

EVACUATE AND CALL THE FIRE DEPARTMENT.

B.NEVER PICK UP A FLAMING PAN— You may be burned.

C.DO NOT USE WATER, including wet dishcloths or towels—a violent steam explosion will result.

D.Use an extinguisher ONLY if:

1.You know you have a Class ABC extinguisher, and you already know how to operate it.

2.The fire is small and contained in the area where it started.

3.The fire department is being called.

4. You can fight the fire with your back to an exit.

*Based on “Kitchen Firesafety Tips” published by NFPA.

WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

A.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

B.Always turn hood ON when cooking at high heat or when cooking flaming foods.

C.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

D.Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

B.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

C.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

D.Ducted fans must always be vented to the outdoors.

WARNING – TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

•Do not attempt to repair or replace any part of your hood unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

2READ AND SAVE THESE INSTRUCTIONS

Page 1 Page 3
Page 2
Image 2
GE JVB93 warranty Read and Save These Instructions
Page 1 Page 3

JVB93 specifications

The GE JVB93 is a sophisticated gas turbine designed for both industrial and utility applications, known for its exceptional efficiency and reliability. As part of GE's lineage of advanced gas turbines, the JVB93 incorporates cutting-edge technology to provide a competitive edge in terms of performance and environmental sustainability.

One of the primary features of the GE JVB93 is its high efficiency. The turbine boasts a thermal efficiency exceeding 45%, which translates to reduced fuel consumption and lower greenhouse gas emissions compared to traditional gas turbines. This efficiency is achieved through the utilization of advanced materials and innovative cooling techniques, enabling the turbine to operate at higher temperatures while maintaining structural integrity.

The JVB93 utilizes advanced aerodynamics in its compressor design, which optimizes airflow and improves overall performance. This state-of-the-art compressor is capable of handling variable operating conditions, ensuring reliable performance across a wide range of loads. The turbine also features a modular design, facilitating easier maintenance and quicker upgrades, ultimately reducing downtime and operational costs for users.

In terms of emissions control, the GE JVB93 is engineered with low NOx combustion technology. This means that the turbine produces significantly lower nitrogen oxides during operation, meeting stringent environmental regulations without compromising on performance. The combination of advanced burner technology and precise fuel management helps deliver clean and efficient power, making it an appealing option for companies focused on sustainability.

Another notable characteristic of the GE JVB93 is its versatility. The turbine can accommodate various fuel types, including natural gas, biogas, and liquid fuels, making it suitable for a range of applications from peaking power plants to continuous baseload operations. This adaptability allows facilities to optimize their fuel procurement strategies and enhance energy security.

Furthermore, the JVB93 is equipped with advanced digital technologies, allowing for real-time monitoring and predictive analytics. These capabilities enable operators to identify potential issues before they escalate, facilitating proactive maintenance strategies that enhance reliability and performance over time.

In summary, the GE JVB93 gas turbine stands out due to its high efficiency, low emissions, and advanced technology. Its modular design, versatile fuel capabilities, and digital integration make it an excellent choice for industries seeking to improve energy efficiency while adhering to environmental standards. This combination of features positions the JVB93 as a key player in the global push for cleaner, more sustainable energy solutions.
Top Page Image Contents