GE JVM58 mainfuse or clrcultWaker pfml or pull plug.

------.-..— —.

TO replace hood lamp, first dlscmmct powerag

mainfuse or clrcultWaker pfml or pull plug.

Remove2screws from eachside of lower panel and

3screws from front edge.Lower panel until it rests

on range below. Besure bulb to be replaced is cool

Toreplaceyour oven lamp, first Wmmnwt powerat

mainfuseorcircuitbreakeror pullplug.Remove the

top grill bytaking off 2screws which hold it In place,

Next, remove the single screw on top left that

secures lamp housing, (CM models so equipped,)

Openoven door for easier removalof the lamp hous-

ing assembly.Then grasptab and pu!! out and up to

clear door hinge and front tip of oven. To remove

bulb,push it inward gently and turn to left, then pull

outward from socket, Replace with GE Lamp

a~~~~~~,

30not attempttooperat~the ovenunlessth~grhi m

nplace.

beforeremoving, Remove bulb or bulbs and replace

with 40watt appliance bulbs. Raise lower oanel and

replace screwk;

waveoven. Connect electrical power-to micro-

\\. I

Clean off the grease and dust on hood surfaces

often. Useawarm detergent solution. About 1table-

spoon of ammoniamay be added to the water. Take

care not to touch the filters and enameledsurfaces

withthis. Ammonia will tendto darken metal,