—
Time Cooking, or cooking your food according to apre- .
determinedamount of time, is probably familiar to you from
conventionalcooking. With your microwave oven, however.
youpreset thetime andthe 6ven turnsoff automatically.
LJsirtg Your Oven to ?’irne CookFollowthe cooking steps below to
help you learn to Time Cook
properly.
Step1: Fill acup 2/3 full of water
and 1 teaspoon of freeze dried
coffee.Useacup that has nometal
decoration. Placecup in oven and
closedoor.
Step 2: Touch TIME COOK. The
display shows :0. Signal light
aboveTIME COC)Kflashes.Power
Level 10 is automatically set in
oven, but does not appear in
display.
Step 3: Select your time. Touch
1,2 andOfor aminute and 20 sec-
onds. 1:20and signal light above
TIME COOK appearon display. If
another Power Level is desired
touch POWfERLEVEL and the
number, although PowerLevel 10
(HIGH) is preferred for this cup of
coffee,
Step 4: Touch START. Time
counting down showson display.
Step 5:
sounds When time is up, oven
and oven, light, and fan
shutoff.
and
Q. Isetmy ovenfor the time called
for in the recipe but at the end of
the time allowed, my dish wasn’t
done.What happened?
A. Since house powor varies due
to time or location, many Time
Cookrecipesgive you atime range
to prevent overcooking,Set the
oven for min~mumtime, test the
food for doneness,and cook your
dishalittle longer, if necessary,
Q. Iwant to cook my dish on a
PowerLevelother than HK3H,what
do 1needto do?
A. To change the Power Level,
touch thePOWERLEVELpad after
entering desired cooking time,
Enterthe desirednumber andthen
tc)uchSTART.
Q. Can Iinterrupt my Time Cook
function to checktt’wfood?
A. Yes,To resumecooking, simply
close the door and touch START,
NOTE: Microwave power will not
come on until you are ready.You
must touch STARTforcooking to
begin.
CL Itouchedthe number padsand
selected my power leveL When I
touchedSTART,however, myoven
didn’t comeoh. Why not?
A. The TIME COOK pad must be
touched beforesetting the number
pads or elseyour oven will not be-
gincooking.
Q. Itried to change Power Level
but the display changed back to
cooking time.Why’?
A, Aftertouching Power Levelpad
you only have4seconds to enter
the number. Try setting controls
again.
10
--------———-——-