Operating Instructions

Changing Power Levels

How to Change the

Power Level

The power level may be entered or changed immediately after entering the feature time for TIME COOK, TIME DEFROST or EXPRESS COOK. The power level may also be changed during time countdown.

1Press TIME COOK or select Time Defrost.

2Enter cooking or defrosting time.

3Press POWER LEVEL.

4Select desired power level 1–10.

5Press START.

Variable power levels add flexibility to microwave cooking. The power levels on the microwave oven can be compared to the surface units on a range. High (power level 10) or full power is the fastest way to cook and gives you

100% power. Each power level gives you microwave energy a certain percent of the time. Power level 7 is microwave energy 70% of the time. Power level 3 is energy 30% of the time.

A high setting (10) will cook faster but food may need more frequent stirring, rotating or turning over. Most cooking will be done on High (power level 10). A lower setting will cook more evenly and need less stirring or rotating of the food.

Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes.

Rest periods (when the microwave energy cycles off) give time for the food

to “equalize” or transfer heat to the inside of the food. An example of this is shown with power level 3—the defrost cycle. If microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted.

Here are some examples of uses for various power levels:

Power Level

Best Uses

High 10

Fish, bacon,

 

vegetables,

 

boiling liquids.

Med-High 7

Gentle cooking of

 

meat and poultry;

 

baking casseroles

 

and reheating.

Medium 5

Slow cooking

 

and tenderizing

 

such as stews and

 

less tender cuts of

 

meat.

Low 2 or 3

Defrosting

 

without cooking;

 

simmering;

 

delicate sauces.

Warm 1

Keeping food

 

warm without

 

overcooking;

 

softening

 

butter.

 

 

13

Page 13
Image 13
GE EVM1750 Changing Power Levels, How to Change Power Level, Press Power Level Select desired power level Press Start

JVM1750, HVM1750, EVM1750, LVM1750 specifications

The GE LVM1750, EVM1750, HVM1750, and JVM1750 are advanced energy management solutions designed to optimize the performance and reliability of industrial and commercial electrical systems. These products by General Electric (GE) are integral to modern power distribution networks, providing unprecedented efficiency and control.

The GE LVM1750 is a versatile low voltage motor control center that emphasizes compact design and high performance. One of its main features is the ability to accommodate a wide variety of motor and control configurations, making it suitable for diverse applications. It incorporates state-of-the-art technology to ensure quick troubleshooting and reduces downtime through its integrated diagnostic tools.

On the other hand, the EVM1750 is engineered for enhanced energy efficiency. This variant utilizes GE’s proprietary EcoStruxure technology, which facilitates real-time monitoring and control of energy consumption. The EVM1750 features advanced algorithms that optimize energy usage while maintaining operational integrity. This optimizes electricity demands during peak times, which can significantly reduce operational costs.

The HVM1750 is noteworthy for its robust construction and ability to handle high-voltage applications. Its main characteristics include superior thermal performance and advanced safety features designed to mitigate risks in high-demand environments. The HVM1750 is ideal for large industrial operations requiring reliable and efficient power management solutions.

Last but not least, the JVM1750 is tailored for renewable energy integrations. It provides crucial capabilities for managing distributed energy resources (DERs) and optimizing energy flows from renewable sources. The JVM1750 is equipped with smart grid capabilities, allowing seamless integration with other energy management systems. Its adaptability makes it an essential component in today’s shift toward sustainable energy practices.

All four models share characteristics such as scalability, reliability, and ease of maintenance. They are designed with user-friendly interfaces that simplify the monitoring and control processes. Furthermore, their modular designs allow for flexible configurations tailored to specific operational needs.

In summary, the GE LVM1750, EVM1750, HVM1750, and JVM1750 are leading-edge solutions that cater to the evolving demands of modern power distribution, emphasizing energy efficiency, safety, and adaptability. Through these innovations, GE continues to play a pivotal role in advancing electrical management technologies across industries.