Connecting a camcorder
You can connect a camcorder to your TV, which enables you to view
camcorder tapes without a VCR.
✓The audio and video cables mentioned in the steps below are usually included with
a camcorder. You can also purchase them at your local electronics store.
1Locate the camcorder’s A/V output jacks on the camcorder.
2Connect an audio cable to the camcorder’s AUDIO OUT terminal.
3Connect the other end of the cable to the TV’s AUDIO IN terminal.
NOTE: Model MG20100 does not have front audio/video input or headphone jacks.
4Connect a video cable to the camcorder’s VIDEO OUT terminal.
5Connect the other end of the cable to the TV’s VIDEO IN terminal.
NOTE: Model MG20100 does not have front audio/video input or headphone jacks.
Installing batteries in the remote control
1Pull the cover to the full to take it out
2Install two AA size batteries. Make sure to match the + and
– ends of the batteries with the diagram inside the compartment.
3Replace the lid.
✓Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
✓The remote control can be used up to about 23 feet from the TV.
✓Batteries last for about one year.
9
C
HAPTER
T
WO
: I
NSTALLATION
I
NSTALLATION
1
2
3
4
5
1
2
3
Camcorder
Output Jacks
VIDEOAUDIO
OUTPUT
Audio Cable
Camcorder
Output Jacks
VIDEOAUDIO
OUTPUT
Video Cable
VIDEO-IN-AUDIO
MENU
Camcorder
Output Jacks
VIDEOAUDIO
OUTPUT
Audio Cable
VIDEO-IN-AUDIO
MENU
-
Camcorder
Output Jacks
VIDEOAUDIO
OUTPUT
Video Cable
1547290B (MG20-E) 3/29/01 10:25 AM Page 13