GE Model 21 Instructions Safety, Consumer, Installation, Support Troubleshooting Tips

Models: Model 21

1 21
Download 21 pages 19.54 Kb
Page 10
Image 10
Behind the Refrigerator

Instructions

Care and cleaning of the refrigerator.

Behind the Refrigerator

Instructions Safety

Be careful when moving the refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.

Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.

When pushing the refrigerator back, make sure you don’t roll over the power cord or icemaker supply line.

Preparing for Vacation

Instructions Operating

For long vacations or absences, remove food and unplug the refrigerator. Move the freezer control to the OFF position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 l) of water. Leave the doors open.

Move the icemaker feeler arm (for icemaker equipped models) to the STOP (up) position and shut off the water supply to the refrigerator.

If the temperature can drop below freezing, have a qualified servicer drain the water supply system (for icemaker equipped models) to prevent serious property damage due to flooding.

Installation

Preparing to Move

Secure all loose items such as grille, shelves

Be sure the refrigerator stays in an upright

and drawers by taping them securely

position during moving.

in place to prevent damage.

 

Support Troubleshooting Tips

1/4Hex Head Screws

Back of Freezer

Front of Freezer

Freezer Light

Light Bulb Replacement

Light bulbs are located at the top of the refrigerator and freezer compartments.

To replace a light bulb, unplug the refrigerator’s power cord plug from the wall outlet.

Freezer Light

To remove light cover, remove the 1/4″ hex head screws at the back of the cover. Slide the cover back and remove. After replacing with the same size bulb, reinstall the light cover and plug in the refrigerator.

Refrigerator Light

To remove the light cover, remove the 1/4″ hex head screws at the back of the cover. Slide the cover back and remove.

After replacing with same size bulb, reinstall light cover and plug in the refrigerator.

Consumer

1/4Hex Head Screws

Refrigerator Light

10

Page 10
Image 10
GE Model 21 Instructions Safety, Consumer, Installation, Support Troubleshooting Tips, Instructions Operating