To Replace the Freezer Drawer
IMPORTANT: Two people may be required to complete this procedure.
Pull out both interior rail assemblies to full length on each side of cabinet. Locate notches in both interior rail extensions.
Notches
Notches
Align tabs on outside edge of drawer rail assemblies with notches in both rail extensions.
Safety Instructions Operating
Insert the hook tab into the corresponding notch in the interior rail extension at a 45° angle. Insert the other tab into the corresponding notch in the interior rail extension by lowering the handle end of the drawer assembly.
Replace the Phillips screws on both rail extensions. Replace the two freezer baskets.
Tabs
Notches
Tab Hook
Tab
Notches
Phillips
Screw
Instructions Installation Instructions Troubleshooting Tips Consumer Support
17
