Instructions

Using the surface units.

Throughout this manual, features and appearance may vary from your model.

Instructions Safety

How to Set

Push the knob in and turn in either direction to the setting you want.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

Be sure you turn the control knob to

OFF when you finish cooking.

A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.

Indicator light will:

■come on when the unit is turned on or hot to the touch.

■stay on even after the unit is turned off.

■glow until the unit is cooled to approximately 150°F.

Care and Cleaning Operating

Dual Surface Unit Control Knob

The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

To use the small surface unit, turn the control knob to the SMALL BURNER settings.

To use the large surface unit, turn the control knob to the LARGE BURNER settings.

Using the Warming Zone (on some models)

Consumer Support Troubleshooting Tips

WARMER GUIDE

SETTING

FOOD

(Low)

Bread/Pastries

(Medium)

Chocolate/Butter

(Medium)

Sauces, Stews,

 

Cream Soups

(Medium)

Vegetables

(High)

Soups (liquid)

(High)

Tea or Coffee

The Warmer Guide is for reference only and the SETTING that you need will depend on the amount and type of food, the starting temperature of the food and the length of the holding time.

The WARMING ZONE, located in the back center of the glass surface, will keep hot, cooked food at serving temperature.

Always start with hot food. Do not use to heat cold food. Placing uncooked or cold food on the WARMING ZONE could result in food-borne illness.

Push and turn the control knob to any desired setting.

For best results, all foods on the WARMING ZONE should be covered with a lid or aluminum foil. When warming pastries or breads, the cover should be vented to allow moisture to escape.

Always use potholders or oven mitts when removing food from the WARMING ZONE, as cookware and plates will be hot.

CAUTION: Do not warm food on the WARMING ZONE for more than two hours.

NOTE: The surface warmer will not glow red like the cooking elements.

A HOT surface indicator light will glow when the glass surface is hot and will remain on until the surface is cool enough to touch. Lower settings may not heat the glass surface enough to cause the HOT surface indicator light to come on.

A WARMING ZONE indicator light will glow when the unit is on.

■Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very difficult to clean.

■Use only cookware recommended for top-of-range cooking.

8

Page 7 Page 9
Page 8
Image 8
GE PB750 owner manual Using the surface units, Instructions Safety
Page 7 Page 9

PB750 specifications

The GE PB750 is a notable addition to the field of power generation, specifically designed for high-efficiency and reliability in the gas turbine market. This model represents a significant advancement in gas turbine technology, providing operators and utilities with an effective solution for meeting growing energy demands while minimizing environmental impact.

At the heart of the GE PB750 is its advanced aerodynamics and materials technology, which contribute to its superior performance. The turbine features a robust design that allows for increased efficiency and flexibility, making it capable of operating in various conditions. The incorporation of advanced cooling techniques ensures that the turbine can maintain optimal performance even at high temperatures, which is essential for meeting peak demand periods in electricity generation.

One of the standout features of the PB750 is its combined cycle capability, which maximizes the energy extracted from the fuel. This technology enables the turbine to use both gas and steam cycles, leading to a significant reduction in carbon emissions compared to traditional single-cycle plants. Furthermore, the GE PB750 is equipped with advanced emissions control systems, which help to further reduce NOx and CO2 emissions, making it compliant with stringent environmental regulations.

The control system of the GE PB750 is designed with digital technology that enhances operational efficiency. Advanced analytics and monitoring capabilities provide real-time insights into performance, allowing operators to make informed decisions. This digital integration also facilitates predictive maintenance, reducing downtime and ensuring the turbine operates at peak performance.

The PB750’s modular design provides greater flexibility in installation and maintenance, making it an attractive option for utility operators. The ability to perform maintenance and upgrades while the unit is operating contributes to overall efficiency and reduces outages.

In summary, the GE PB750 gas turbine exemplifies cutting-edge technology in the power generation sector. Its high efficiency, reduced emissions, and advanced digital controls make it a suitable choice for meeting the energy demands of the future while ensuring compliance with environmental standards. As the world shifts towards cleaner energy solutions, the PB750 stands out as a reliable and innovative option for power generation.
Top Page Image Contents