Cleaning the glass cooktop.

ge.com

Safety

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

Normal Daily Use Cleaning

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes clean-up easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Instructions Operating Instructions

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than those recommended.

Allow the cooktop to cool.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Care and

Using the included CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops, rub the residue area, applying pressure as needed.

Heavy, Burned-On Residue

Cleaning

The CERAMA BRYTE® Ceramic Cooktop Scraper and all recommended supplies are available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

Allow the cooktop to cool.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area. Use the CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Troubleshooting Tips Consumer Support

29

Page 28 Page 30
Page 29
Image 29
GE PB750 owner manual Cleaning the glass cooktop, Care
Page 28 Page 30

PB750 specifications

The GE PB750 is a notable addition to the field of power generation, specifically designed for high-efficiency and reliability in the gas turbine market. This model represents a significant advancement in gas turbine technology, providing operators and utilities with an effective solution for meeting growing energy demands while minimizing environmental impact.

At the heart of the GE PB750 is its advanced aerodynamics and materials technology, which contribute to its superior performance. The turbine features a robust design that allows for increased efficiency and flexibility, making it capable of operating in various conditions. The incorporation of advanced cooling techniques ensures that the turbine can maintain optimal performance even at high temperatures, which is essential for meeting peak demand periods in electricity generation.

One of the standout features of the PB750 is its combined cycle capability, which maximizes the energy extracted from the fuel. This technology enables the turbine to use both gas and steam cycles, leading to a significant reduction in carbon emissions compared to traditional single-cycle plants. Furthermore, the GE PB750 is equipped with advanced emissions control systems, which help to further reduce NOx and CO2 emissions, making it compliant with stringent environmental regulations.

The control system of the GE PB750 is designed with digital technology that enhances operational efficiency. Advanced analytics and monitoring capabilities provide real-time insights into performance, allowing operators to make informed decisions. This digital integration also facilitates predictive maintenance, reducing downtime and ensuring the turbine operates at peak performance.

The PB750’s modular design provides greater flexibility in installation and maintenance, making it an attractive option for utility operators. The ability to perform maintenance and upgrades while the unit is operating contributes to overall efficiency and reduces outages.

In summary, the GE PB750 gas turbine exemplifies cutting-edge technology in the power generation sector. Its high efficiency, reduced emissions, and advanced digital controls make it a suitable choice for meeting the energy demands of the future while ensuring compliance with environmental standards. As the world shifts towards cleaner energy solutions, the PB750 stands out as a reliable and innovative option for power generation.
Top Page Image Contents