About cycle options.

NOTE: Not all features are available on all dryer models.

GEAppliances.com

EXTENDED

TUMBLE

DAMP

ALERT

Extended Tumble

Minimizes wrinkles by adding approximately 60 minutes of no-heat tumbling after clothes are dry.

The light in center of the button will light up when EXTENDED TUMBLE is on.

Damp Alert

This option causes the dryer to beep when clothes have dried to a damp level. Remove items that you wish to hang dry. The DAMP ALERT will only beep when this option is selected.

ExtendedTumbleisautomaticallyselectedforthe SteamRefresh cycle and cannot be deselected. Dryer will beep and display “Garments Ready” when SteamRefresh is complete. The dryer will continue in Extended Tumble until the door is opened.

Removing clothes and hanging them when they are damp can reduce the need to iron some items.

The light in center of the button will light up when DAMP ALERT is on.

DRUM LIGHT

SETTINGS

Drum Light

Press this button to turn on the light in the dryer. Press the button again to turn the light off.

This only controls the light when the door is shut.

NOTE: The light will turn off by itself after one minute when the door is shut.

When the door is opened, the light comes on automatically.

The light in center of the button will light up when DRUM LIGHT is on.

NOTE: Hold down the DRUM LIGHT button for 3 seconds to access the SETTINGS menu. (See page 10 for more details)

e

DRY

LOCK

Push to Lock Control

Hold 3 Secs to Unlock

e-Dry

Reduces the total energy consumption of

This cycle can be used with DELICATES, ACTIVE

specific dryer cycles by adjusting certain heat

WEAR, EASY CARE, NORMAL/MIXED LOADS

settings.

and COTTONS.

NOTE: Cycle times will change when e-DRY is

 

selected

 

Delay Start

Use to delay the start of your dryer.

NOTES:

1. Choose your dry cycle and any options.

„ If the door is opened while the dryer is

2. Press DELAY START. You can change the

in DELAY, the countdown time will not

restart unless the door is closed and

delay time in 1/2-hour increments, using the

START/PAUSE button has been pressed

S or T arrow pads.

again.

3. Press the START/PAUSE button to start the

„ You can delay the start of a dry cycle up

countdown.

to 24 hours.

The countdown time will be shown in the

The light in center of the button will light up

ESTIMATED TIME REMAINING display.

when DELAY START is on.

 

 

 

Lock

To lock the dryer, press the LOCK button. To

You can lock the controls to prevent any

unlock the dryer, press and hold the LOCK

button for 3 seconds.

selections from being made. Or you can lock

The light in center of the LOCK button will light

the controls after you have started a cycle.

Children cannot accidentally start the dryer by

up when the controls are locked.

Even though the controls are locked, the POWER

touching pads with this option selected.

 

button is still active in case you have to turn the

 

unit off.

9

Page 8 Page 10
Page 9
Image 9
GE PFDN440, PFDS450, PFMN445, PFDS455, PFMS450, PFMN440, PFDN445, PFMS455 operating instructions About cycle options, Settings
Page 8 Page 10

PFMS455, PFMS450, PFDN445, PFDN440, PFDS450 specifications

The GE PFMN440, PFMN445, PFDS455, PFDS450, and PFDN440 are part of GE’s innovative family of radio frequency (RF) power transistors designed for various commercial and industrial applications. These devices are renowned for their efficient performance, providing a blend of high power output and reliability, ideal for telecommunications, broadcasting, and other RF applications.

The GE PFMN440 and PFMN445 are members of the RF transistor family that offer robust performance in high-frequency applications. The PFMN440 is particularly noted for its outstanding linearity and power gain, which makes it suitable for use in RF amplifiers and transmitters. Its compact package and advanced thermal management design enable efficient heat dissipation, which is critical in maintaining performance under load. The PFMN445, with a higher power rating, amplifies these characteristics, supporting greater output levels while maintaining linearity, resulting in clearer signal output.

The PFDS455 and PFDS450, on the other hand, are optimized for industrial applications with features that emphasize durability and efficiency. The PFDS455 stands out for its ability to handle higher voltages and currents, making it an excellent choice for applications that require resilience against overloads. The device's superior thermal stability ensures that it performs consistently across a range of operational environments. The PFDS450 shares many of these attributes but is tailored for applications requiring a slightly lower output, making it versatile for different RF circuit designs.

The PFDN440 is designed with specialized technologies that enhance its functionality in digital and mixed-signal environments. It integrates advanced semiconductor materials which reduce power consumption and improve efficiency without compromising performance. This device is particularly useful in applications that demand high-speed operation and reliability, making it a preferred choice for modern communication systems.

All these transistors utilize state-of-the-art manufacturing processes, including advanced doping techniques and epitaxial growth, which contribute to their excellent electrical characteristics. Their high thermal conductivity, high breakdown voltage, and wide frequency response range make these devices suitable for both commercial and specialized applications.

Overall, GE's PFMN440, PFMN445, PFDS455, PFDS450, and PFDN440 transistors are emblematic of modern RF technology, combining power, efficiency, and reliability to cater to a wide spectrum of RF applications.
Top Page Image Contents