10
Before You Begin
IMPORTANT: Save these instructions for the
local electrical inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES
AND ORDINANCES.
NOTE TO INSTALLER: Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER: Keep this Owner’s
Manual and Installation Instructions for
future use.
NOTE: This appliance must be properly
grounded.
NOTE: Insure that the power cord does not
contact the hot surfaces on the bottom of
ovens, cooktops, or any other appliance.
Tools Needed
■2 x4 or 2 x 2 lumber for runners and brace
■Wood screws and adhesive or other hardware
for installing runners or shelf to support
warmer drawer.
Runners must be level, rigidly mounted and capable of
supporting 150 pounds.
■Saw
■Level
■Drill and 1/16″bit
■Phillips screwdriver
Custom Panel Kits
ZXD27B—This kit provides for the installation
of a custom front panel on 27″wide models.
ZXD30B—This kit provides for the installation
of a custom front panel on 30″wide models.
Product Dimensions
27″231⁄4″
9″
1″A
101⁄2″
261⁄4″
Including handle
Dimension A
27″Drawer 30″Drawer
263⁄4″30 ″
Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions
Installation of the warming drawer.
Read these instructions completely and carefully.