Ethernet Gateway
IP Address COM
port Modbus RTU
Address
Device Type
Device (Topic) Name
10.47.28.201 1 2 EPM 9650Q E9650Q
10.47.28.201 1 12 E3720 Main_Meter
10.47.28.201 1 33 PLEPM Mfg_Meter
10.47.28.201 1 61 PLEPM Plating_Meter
10.47.28.201 2 12 UR L90 UR
10.47.28.201 2 66 PLEPM Office1_Meter
10.47.28.201 2 80 PLM Office2_Meter
10.47.28.201 2 90 MDP Feeder1_Relay
10.47.28.201 2 100 MVT Mfg_Breaker
10.47.28.201 3 200 ML269 Mill_Relay
10.47.28.201 4 21 EPM5350P E5350P
10.47.28.201 4 201 MVT Plating_Breaker
10.47.28.201 4 210 MVT Office_Breaker
View Node You should configure View Nodes after you have configured and tested the
Host PC to ensure all functions are operating. View Nodes require a copy of the
network architecture list used above. Refer to GEH-6510, Network and Device
Configurator, for complete configuration instructions.
CIMPLICITY PMCS Read-This-Book-First Configuring the Software • 53