ge.com

Observe the Following Points in Canning

Safety

Right!

Wrong!

Note: Flat-bottomed canners are required for glass cooktops.

When canning with water-bath or pressure canner, larger-diameter pots may be used. This is because boiling water temperatures (even under pressure) are not harmful to the cooktop surfaces surrounding the surface elements.

HOWEVER, DO NOT USE LARGE- DIAMETER CANNERS OR OTHER LARGE-DIAMETER POTS FOR FRYING OR BOILING FOODS OTHER THAN WATER. Most syrup or sauce mixtures—and all types of frying—cook at temperatures much higher than boiling water. Such temperatures could eventually harm the glass cooktop surfaces.

Be sure the canner fits over the center of the surface element. If your cooktop or its location does not allow the canner to be centered on the surface element, use smaller-diameter pots for good canning results.

Flat-bottomed canners must be used. Do not use canners with flanged or rippled bottoms (often found in enamelware) because they don’t make enough contact with the surface elements and take a long time to boil water.

When canning, use recipes and procedures from reputable sources. Reliable recipes and procedures are available from the manufacturer of your canner; manufacturers of glass jars for canning, such as Ball and Kerr brand; and the United States Department of Agriculture Extension Service.

Remember that canning is a process that generates large amounts of steam. To avoid burns from steam or heat, be careful when canning.

NOTE: If your house has low voltage, canning may take longer than expected, even though directions have been carefully followed. The process

time will be shortened by:

(1) using a pressure canner, and

( 2) starting with HOT tap water for fastest heating of large quantities of water.

CAUTION:

Safe canning requires that harmful microorganisms are destroyed and that the jars are sealed completely.

When canning foods in a water-bath canner, a gentle but steady boil must be maintained for the required time. When canning foods in a pressure canner, the pressure must be maintained for the required time.

After you have adjusted the controls, it is very important to make sure the prescribed boil or pressure levels are maintained for the required time.

Since you must make sure to process the canning jars for the prescribed time, with no interruption in processing time, do not can on any cooktop surface element if your canner is not flat.

Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

11

Page 11
Image 11
GE PP980, PP950 owner manual Observe the Following Points in Canning, Time will be shortened by Using a pressure canner

PP980, PP950 specifications

The GE PP950 and PP980 are high-efficiency gas turbine models that exemplify General Electric's commitment to innovation in energy production. These turbines are designed to meet the increasing demand for reliable and sustainable power generation, catering to a variety of applications including base load and peaking power.

One of the standout features of the PP950 and PP980 turbines is their advanced aerodynamics and combustion technologies. These turbines utilize an innovative combustion system that allows for lower emissions while maximizing fuel efficiency. The turbines are engineered to operate on a variety of fuels, including natural gas and liquid fuels, providing operators with flexibility in fuel choice and enhanced operational resiliency.

In terms of performance, the PP950 and PP980 turbines boast impressive power output capabilities, with the PP980 capable of generating over 300 megawatts of electricity. This makes them suitable for large-scale energy projects, as well as for integration into cogeneration and combined cycle power plants. The turbines are designed for rapid startup, enabling them to respond quickly to fluctuations in power demand, which is critical for grid stability.

Another significant characteristic of these turbines is their modular design, which facilitates easier maintenance and reduced downtime. The use of advanced materials and manufacturing techniques not only enhances the durability of the components but also contributes to better operational performance. This ensures that the turbines maintain high reliability throughout their operational lifespan.

The GE PP950 and PP980 are also equipped with sophisticated control systems that optimize their performance in real-time, adapting to changing load requirements and grid conditions. These control systems enhance the turbines’ overall operational efficiency and reliability, allowing for more predictable energy output.

Additionally, GE has incorporated digital solutions into the monitoring and management of these gas turbines, including predictive maintenance tools that analyze performance data. This proactive approach helps plant operators minimize unplanned outages, ultimately leading to greater cost savings and improved asset management.

In conclusion, the GE PP950 and PP980 gas turbines represent a fusion of cutting-edge technology and robust engineering. With their high efficiency, low emissions, and adaptability to different fuel sources, they are well-suited to meet the evolving needs of the global energy landscape. As power generation continues to shift toward cleaner and more efficient solutions, these models stand out as reliable and advanced choices for energy producers.