GE PSB42YSX dimensions 25-3/8 Case Depth, Case Width, at Rear, Frame-to-Frame, Depth Including

PSB42YSX

GE Profile™ 42" Built-In Stainless Side-By-Side Refrigerator with Dispenser

Dimensions and Installation Information Product Clearances

These refrigerators are equipped with a 2 position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

25-3/8" Case Depth

Stainless Steel Wrapped Refrigerators	41"
	Case Width
Stainless Steel wrapped refrigerators have wrapped
doors and grille panels, and beveled edges. These
models are shipped ready for installation.

130° Door Swing

A B

D

90° Door Swing

23-7/8" Behind Frame

C

D

*81-3/4"	*84" From
at Rear	Floor to
	Top Frame

Models	A	B	C	D
42"	12-3/16"	16"	24"	4"

Allow minimum clearances for Freezer door (Dimension

A)and Fresh Food door (Dimension B) for a full 130° door swing and to allow for drawer removal.

Four inch (4") minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, drawer access is maintained, but drawer removal is restricted.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

42" Frame-to-Frame

	Depth Including
	Handles 27"
	*Shipping height
	*The front height may be adjusted from 83-1/2"
	to 84-1/2" by adjusting front and rear leveling
	legs a maximum of 1".
Total volume and shelf	Listed by	As an Energy Star®
area are calculated by		partner, GE has determined
	Underwriters
the Association of Home		that this product meets the
	Laboratories
Appliance Manufacturers’		Energy Star guidelines
standards.		for energy efficiency.

Specification Created 1/08 210378