Installation Instructions
3
3 RECONNECTING GAS
Note: The connector and ttings are designed for use
only on the original installation and are not to be reused
for another appliance or at another location. Keep are
end of adaptor free of grease, oil and thread sealant.
Caution: Use adapters as shown. Connector nuts must
not be connected directly to pipe threads.
WARNING: NEVER USE AN OPEN
FLAME TO TEST FOR GAS LEAKS.
FLARE NPT
PIPE SIZE
Listed connector ANSI Z21.24 / CSA 6.10
1/8" NPT PIPE
PLUG FOR
CHECKING GAS
INLET PRESSURE
AT LEAST 1/2"
3/8" NPT
TIGHTEN THE FLEXIBLE
GAS LINE USING TWO
ADJUSTABLE WRENCHES.
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!