GE PVM2070 warranty B OUTSIDE BACK EXHAUST Horizontal Duct, B2. REMOVE EXHAUST ADAPTOR

Installation Instructions

B OUTSIDE BACK EXHAUST (Horizontal Duct)

INSTALLATION OVERVIEW

B1. Prepare Rear Wall

B2. Remove Exhaust Adaptor

B3. Attach Mounting Plate to Wall

B4. Prepare Top Cabinet

B5. Adjust Blower

B6. Mount the Microwave Oven

NOTE:

* Make sure the screws for the blower motor and blower cover are re-tightened securely to prevent excessive vibration.

* Make sure the motor wiring is properly re-routed and secure.

B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST

You need to cut an opening in the rear wall for outside exhaust.

•Read the instructions on the REAR WALL TEMPLATE.

•Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate.

•Cut the opening, following the instructions of the

REAR WALL TEMPLATE.

B2. REMOVE EXHAUST ADAPTOR

This microwave oven is shipped assembled for top exhaust. You will need the exhaust adaptor for installation in the rear wall opening. To remove the exhaust adaptor from the microwave oven:

1Remove tape securing damper.

2 Remove and		3 Lift off the
save screw		blower plate
that holds	Damper	and attached
blower plate		adaptor from
to microwave.		the microwave.

Back of

Microwave

4Slide exhaust adaptor to one side and remove it.

15