Installation Instructions
C4. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION (cont.)
8Guide the wire down into the blower opening so it rests securely in front of the blower.
9Secure blower unit to microwave with the screw removed in Step 4.
10Replace blower plate with the screw removed in Step 1.
NOTE: When mounting the microwave oven, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps
2Rotate front of oven up against cabinet bottom.
1
Lift microwave, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate.
Back of
Microwave
C5. MOUNT THE MICROWAVE OVEN
FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle during installation.
NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord.
NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws.
3Insert a
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Equivalent to Depth of Cabinet Recess
Microwave Oven Top
4Attach the microwave oven to the top cabinet.
21